Copying/Moving Still Image Files - JVC GZ-MG20U Getting Started

Copying/Moving Still Image
Files
You can copy or move still image files between
the built-in hard disk (HDD) and SD card using
the on-screen display.
Before proceeding to following steps,
Make sure that SD card is inserted in the SD
slot.
Make sure that enough free space is left in the
copy/move destination medium.
1
Set the power switch to
2
Press MENU. The menu screen appears.
3
Press / to select [REC MEDIA
SETTING], then press 49.
4
Press / to select [COPY/MOVE], then
press 49.
5
Press / to select [COPY] or [MOVE],
then press 49.
COPY: Files are copied to the destination
medium while leaving original files in the source
medium.
MOVE: Files are moved to the destination
medium while deleting original files (except
read-only files) in the source medium.
6
Press / to select the direction of copy/
move, then press
SD ] HDD)
or .
. (HDD ] SD or
MANAGING FILES
To copy or move by selecting files
7
Press / to select [FILE], then press 49.
The index screen appears.
8
Press / / /
then press 49.
The check mark ( ) appears on the selected file.
To select other files, repeat this step.
The scroll bar can also be used with the zoom
lever and / . (
9
Press MENU to return to the previous screen.
10
Press / to select [EXECUTE], then
press 49.
11
File transfer starts.
To stop the file transfer, press 49, then select
[EXECUTE] and press 49.
12
When [COPYING (MOVING)
COMPLETED] appears, press 49 to finish the
operation.
To copy or move all still image files in the
recording medium
7
Press / to select [ALL].
8
Press / to select [EXECUTE], then
press 49.
If you want to cancel, select [CANCEL], then
press 49.
9
File transfer starts.
To stop the file transfer, press 49, then select
[EXECUTE] and press 49.
10
When [COPYING (MOVING)
COMPLETED] appears, press 49 to finish the
operation.
EN
to select a desired file,
pg. 30)
41