Cleaning Up A Recording Medium - JVC GZ-MG20U Getting Started

40
MANAGING FILES
EN
To delete by selecting multiple files
5
Press / to select [FILE SELECT], then
press 49.
The index screen appears.
6
Press / / /
to delete, then press 49.
To select other files, repeat step
The scroll bar can also be used with the zoom
lever and pressing
If you slide the zoom lever towards T, the preview
screen is displayed. Sliding the zoom lever
towards W returns to the index screen.
7
Press MENU.
8
Press / to select [EXECUTE AND
QUIT], then press 49.
The selected files are deleted.
To delete all files
5
Press / to select [DELETE ALL], then
press 49.
6
Press / to select [EXECUTE], then
press 49.
To cancel deletion, select [CANCEL], then press
49.
NOTES:
Protected files cannot be deleted. To delete them,
release protection first. (
Once files are deleted, they cannot be restored.
Check files before deleting.
CAUTION:
Do not remove the recording medium or perform
any other operation (such as turning off the power)
during deletion. Also, be sure to use the provided
AC adapter, as the recording medium may be
corrupted if the battery becomes exhausted during
deletion. If the recording medium becomes
corrupted, format it. (
to select the file you want
6
.
/ . ( pg. 25, 30)
pg. 39)
pg. 20)
Cleaning Up a Recording
Medium
Writing speed of recording media tends to
become slow after long period of repeated use.
To regain the speed, execute cleanup
periodically. The cleanup function is equivalent
to "Defragmentation" of PC's function.
NOTES:
Make sure to use the provided AC adapter for the
power supply when cleaning up a recording
medium. ( pg. 16)
It is recommended to run check disk regularly on
the PC, on condition that there is no data on the
hard disk of the camera.
1
Set the power switch to
2
Press MENU. The menu screen appears.
3
Press / to select [REC MEDIA
SETTING], then press 49.
4
Press / to select [CLEAN UP], then
press 49.
5
Press / to select [HDD] or [SD], then
press 49.
If the AC adapter is not connected to the camera,
a warning message appears. In this case, connect
the AC adapter.
6
Press / to select [EXECUTE], then
press 49.
To cancel cleanup, select [CANCEL], then press
49.
7
When cleanup is finished, [CLEANING UP
COMPLETED] appears. Press 49 to complete
the operation.
Depending on the hard disk drive it may take
several minutes for this process to be completed.
CAUTION:
Do not remove the recording medium or perform
any other operation (such as turning off the power)
during cleanup.
/
or .