Using The Reset Button - Panasonic KX-TD612E Installation Manual

3.1.4 Using the Reset Button

If the system does not operate properly, use the reset button.
Before using the reset button, try the system feature again to confirm whether there definitely
is a problem or not.
Notes:
1.
When the system clear switch is set to "NORMAL," pressing the reset button causes the
following:
a)
Camp-On is cleared.
b)
Calls on Hold are terminated.
c)
Calls on Exclusive Hold are terminated.
d)
Calls in progress are terminated.
e)
Call Park is cleared.
Other data stored in memory, except the above, are not cleared.
2.
When the system clear switch is set to the "CLEAR" position, you must press the reset
button with caution, because all data stored in memory will be cleared by the following
operation: pressing the reset button and then setting the system clear switch to the
"NORMAL" position while the power indicator is flashing (within approximately 10
seconds).
Operation
1.
If the system does not operate properly,
a)
Make sure that the system clear switch is set to the "NORMAL" position.
b)
Press the reset button.
2.
If the system still does not operate properly,
a)
Set the system clear switch to the "CLEAR" position.
b)
Press the reset button.
c)
Return the system clear switch to the "NORMAL" position while the power indicator is
flashing (within approximately 10 seconds).
Note
As a result of Step2, all the programmed data will be cleared.
3.
If the system still does not work, unplug the system and plug it in again after 5 minutes.
4.
If the system still does not work,
a)
Unplug the system.
b)
Set the system clear switch to the "CLEAR" position.
c)
Plug in the system.
d)
Press the reset button.
Installation Manual
Troubleshooting
87