Replacing The Palm Rest - Dell Latitude X200 Service Manual

Palm Rest: Dell Latitude X200 Service Manual
1 palm-rest flex cable
2 ZIF connector
7. Lift the palm rest up and out of the computer.

Replacing the Palm Rest

To aid with proper flex cable connection, a blue locator line has been added near the
end of the palm-rest flex cable. When replacing the palm-rest flex cable, press the
cable into the connector until the blue line aligns with the system board and hold it
steady while you snap the ZIF connector down. (The blue line may reappear after the
connector is closed, which should not indicate a problem with the connection.)
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Latitude/x200/palmrest.htm (3 of 4) [2/28/2004 8:23:59 AM]