Descaling Procedure - Philips HD7825 User Manual

Philips hd7825 coffee machine user manual

Hide thumbs Also See for HD7825:

Use the correct descaling agent

Only citric acid-based descalers are suitable for descaling the machine.

This type of descaler descales the machine without damaging it. For the correct

amount, see under 'Descaling procedure' below. Each descaling mixture can be

used only once. After use, the descaling mixture is no longer active.

We advise you to use the special Descaler (HD7012, HD7011, HD7006).

For more information about this descaler, visit our website www.philips.com.

Never use a descaling agent based on mineral acids such as sulphuric

acid, hydrochloric acid, sulphamic acid and acetic acid (e.g. vinegar).

These descaling agents may damage your pod coffee machine.

Descaling procedure

Note: The descaling procedure for this machine differs from that of previous

models.

Note: The descaling procedure consist of 2 descaling cycles and 2 flushing

cycles. Do not interrupt the descaling cycles and do not switch off the machine

before or between the flushing cycles.

Press the on/off button 3.

The machine is ready for use when the light ring lights up

continuously.

Mix 50 grams of citric acid with 1 litre of water. Fill the water

reservoir with the descaler mixture.

Put the water reservoir back onto the pod coffee machine.

Place the 1-cup pod holder q with a used coffee pod in it in the pod

coffee machine. Close the lid and make sure it is properly locked.

Make sure the lid is closed properly and the lid lever is locked before

you start descaling the machine.

Note: Always put a used coffee pod in the pod holder when you descale the

machine. This pod serves as a 'filter' to prevent the sieve or hole in the pod

holder from getting clogged with scale residue.

EnglisH

Table of Contents