Philips HD7825 User Manual page 10

EnglisH
10
During the flushing cycle, the boiler fills itself with water from the
,
water reservoir and cold water comes out of the coffee spout.
During the flushing cycle, the machine produces more noise than
during a regular brewing cycle.
, When all the water in the water reservoir has been used up, the
flushing cycle is finished and the machine switches off.
now your Philips Pod coffee machine is ready for use.
Note: If the machine does not work, repeat steps 1-8. Do not interrupt the
flushing cycle.
Brewing coffee
Tips for the best quality
- Use fresh water every time.
- Use French café The POD Six that have been specially developed by
for your pod coffee machine for a full, round taste.
- To make sure that the coffee always tastes optimally, rinse the pod
holders, the coffee collector and the coffee spout regularly.
- The coffee tastes best if you stir it before you drink it.
- If you have not used the pod coffee machine for some time, flush the
machine before you use it again (see section 'Flushing the pod coffee
machine' in chapter 'Cleaning the machine') with fresh water before
you use it again.
- If you intend to make another cup of coffee later, just leave the pod
coffee machine switched on. The machine automatically switches off
after 30 minutes.
Filling the water reservoir
1 Fill the water reservoir with cold water up to the MAX indication
and put it back onto the machine.
Never pour milk, coffee, hot water or carbonated water into the water
reservoir.
The MIN indication on the water reservoir indicated the minimum
amount of water required for brewing coffee. Always fill the water
reservoir beyond the MIN level.