Philips HD7825 User Manual page 9

3 Put the water reservoir back.
4 Place a bowl with a capacity of at least 1.5 litres on the cup tray.
5 Make sure a pod holder, without pod or pods, is in place.
6 Put the plug in an earthed wall socket.
7 Press the on/off button 3.
The light ring around the on/off button lights up to indicate that you have
to flush the machine.
8 To start flushing, press the 1-cup button q and the 2-cup button
qq briefly at the same time.
Never interrupt the flushing cycle halfway. If you do, the boiler does not
fill itself properly.
The light ring around the on/off button starts flashing to indicate that
,
the flushing cycle has started. The flushing cycle takes approx. 1.5 to
2.5 minutes.
EnglisH
9