Viewing The Character Entry Screen - AU Digno ISW11K Manual

Viewing the Character Entry Screen

《Character entry screen (10-Key)》
① Character entry area
② Normal conversion candidates list/Prediction candidates
list
Enter characters and tap
conversion candidates list. If the word prediction function
is enabled, the prediction candidates list is displayed
when characters are entered.
• You can enlarge the candidates list area by tapping .
Tap to return it to the original display.
③ Back key/Undo key
: Displays the characters assigned to the same key in
the reverse rotation.
• Back function cannot be used in flick input.
: You can cancel the last operation such as returning
the determined characters to the undetermined state
by tapping the key.
④ Software keyboard
You can enter a character assigned to each key.
24
《Character entry screen (QWERTY)》
to display the normal
⑤ Cursor key
Moves the cursor to the left and right. Change the range
of the characters for character input and conversion.
⑥ Emoji, Symbol, and Facemark key/Kana, Alphanumeric
key
:Displays the list of Emoji/Symbol/Facemark.
: Displays hiragana, katakana, alphabet, number and
predicted date and time assigned to the entered key
as conversion candidates.
⑦ Character entry mode switch key
Switches the character types to enter.
When you switch the character types, the display
changes as follows.
:Hiragana-Kanji
:Half-width alphabet
:Half-width numeric
:Half-width Katakana
⑧ DEL key
Deletes the selected character or the character on the
left of the cursor.
⑨ Settings key/Conversion key/Space key
:Displays iWnn IME menu.
: Displays the normal conversion candidates list.
• Appears in hiragana entry
:Enters the space.
• Appears in numeric/half-width alphabet entry etc.
⑩ OK key/Enter key
:Determines the entering characters.
:Inserts a line feed at the cursor position.
• The display is changed depending on the
application or entering item.
:Full-width alphabet
:Full-width numeric
:Full-width Katakana
:Voice input