Character Input Switching Software Keyboards - AU Digno ISW11K Manual

Character Input
Switching Software Keyboards
Tap the character entry field to display software keyboard
and enter characters by tapping keys on the screen.
The following software keyboards are available for the
ISW11K.
QWERTY You can enter a displayed character by
tapping the character entry key. Use
romaji for entry.
Characters are switched and entered
10-key
every time the character entry key is
tapped.
Handwriting You can enter a displayed character by
Handwriting.
(LaLaStroke)
1
On the character entry screen(10-key),
10-key ⇔ QWERTY/Change to LaLaStroke.
• Alternatively, on the character entry screen (QWERTY),
→ 10-key⇔QWERTY/Change to LaLaStroke.
long-touch
• Alternatively, on the handwriting (LaLaStroke) entry
→ iWnnIME切替 (Change to iWnn IME).
screen,
• At the time of purchase, "iWnn IME" and "Handwriting
(LaLaStroke)","Android keyboard" are installed as
input software. The operations of "iWnn IME" are
described in this manual.
■
Flick input
When the software keyboard is "10-key", you can enter a
desired character by flicking the key up, down, left or right
without tapping the key repeatedly.
By long-touching a key, the candidates that can be
entered by flicking entry are displayed. By flicking the key
in the direction of a desired character being displayed,
the character is entered in the character entry area. For
example, you can enter "a" by only tapping
can enter "b" by flicking
➡
Long-
touch
→
, and you
left.
➡
Flick
left
23