Important Notes - Stanley Aoife Installation And Operating Instructions Manual

Now that your Stanley solid fuel Stove is installed and no doubt you are looking forward to many comforts it will
provide, we would like to give you some tips on how to get the best results from your stove.
1. We would like if you could take some time to read the operating instructions/hints, which we are
confident, will be of great benefit to you.
2. Do not burn fuel with a high moisture content, such as a damp peat or unseasoned timber. This
will only result in poor performanc, a build up of tar in the stove and in the chimney.
Anthracite 25-50mm
House Coal 25-75mm
Timber - Firebox size
Peat Briquettes
Bog Peat
3. CLEAN THE FLUE-WAYS OF THE STOVE EVERY WEEk AND ENSURE THAT THERE ARE
NO BLOCkAGES. PLEASE REFER TO MANUAL FOR INSTRUCTIONS.
4. Before loading fresh fuel into the firebox, riddle fully to remove all ashes this will allow better and
cleaner burning. See Re-Fuelling Section.
5. Never allow a build up of ashes in the ash pan, as this will cause the grate to burn out prema-
turely.
6. Avoid slow burning of damp or unseasoned fuel as this will result in tarring flue ways and chim-
ney i.e. peat or timber.
7. Allow adequate air ventilation to ensure plenty of air for combustion.
8. Do not burn rubbish/household plastic.
9. Clean the chimney at least twice a year.
10. Burning soft fuels such as timber and peat will stain the glass. Regular cleaning will prevent per-
manent staining.
11. Keep all combustible materials a safe distance away from unit, please see section for clear-
ances to combustibles.
12. For safety reasons never leave children unaccompanied while stove is in use.
13. Avoid contact with unit when in use as stove reaches very high operating temperatures.

IMPORTANT NOTES

FUEL CALORIFIC VALUES - SOLID FUELS
C.V.: 8.2kW/Kg
C.V.: 7.2kW/Kg
C.V.: 5.0kW/Kg
C.V.: 4.8kW/Kg
C.V.: 3.4kW/Kg
14,000 BTUs/lb
12,000 BTUs/lb
8,600 BTUs/lb
8,300 BTUs/lb
6,000 BTUs/lb
9