Light
State
Flashing
On
Link
status
(Green)
Off
settInG uP the equIPment
set uP the reCeIver
1. If you are using the receiver as a stand-alone unit, flip out the stand on the back of the receiver,
and extend the antenna. Connect an AC adapter to the power input on the side of the receiver.
If you are using the receiver in the cradle, insert the receiver into the cradle and connect an AC
adapter to the input on the back of the cradle.
2. Connect the other end of the adapter to a 120 volt AC (standard indoor) power outlet.
3. Press and hold the
4. The receiver displays the Uniden Welcome screen for a few seconds and then transitions to the
LIVE view.
The screen remains dark until the cameras are powered up.
mount the Camera stanD
General Guidelines
The Uniden Guardian GC45 cameras included with your receiver are weatherproof and have an
IP66 rating. Water can be sprayed on them and they will still work; however, the cameras cannot be
submerged underwater.
Although the cameras can be exposed directly to the rain, it is recommended that, if they are used
outdoors, they be mounted under some type of cover like a patio overhang or eave. As rainwater
drops start to dry on the camera glass, it can create spots that will reflect the light from the infrared
LEDs used for night vision, thus causing lower quality video.
What it means
The camera is in pairing mode.
The camera is connected to the receiver.
The camera is in standby.
button on the top of the receiver for 3 - 4 seconds to power it up.
PoWer
7