Low beams/high beams
The low/high beams have high-voltage bi-
xenon lamps.
Avoid any operation with the ignition key in
position II.
For replacement, contact your Authorized
Ferrari Dealer.
For headlamp beam aiming, contact your
Authorized Ferrari Dealer.
Replacing the front direction indicator and
position light bulb
To access the headlight bulbs, turn the
wheels completely to the inside and remove
the inspection cover positioned on the front
part of the wheelhouse.
• Disconnect the battery using the battery
master switch (see
page
122).
• Turn the bulb holder
counterclockwise
A
and remove it from its seat.
�
• Remove the bulb
B
by pushing
and simultaneously turning it
counterclockwise.
�
�
• Fit the new bulb by pushing it into
place in the bulb holder and turning it
clockwise.
• Reposition the bulb holder in its seat and
turn it clockwise until it locks.
• To access the position light bulb remove
the protective cap
C
.
4 - In an emergency
• Remove the bulb holder
and remove it
D
from its seat.
• Remove the bulb
E
of the position light
and replace it.
and replace it.
�
�
• Reposition the bulb holder in its seat and
refit the protective cap.
• Reconnect the battery.
Replacing the side direction indicator bulb
• First remove the indicator transparent
cover
A
and then the bulb holder
B, being careful not to damage the
bodywork.
• Remove the bulb
removing it from the
C
bulb holder.
• Replace the bulb and refit the bulb
holder and then the plastic cover.
�
103