Parrot Asteroid Quick Start Manual page 6

Phone
Receiving a call
• An incoming call is indicated by a ringtone. The
name of the caller is announced if his number is
recorded in the phonebook of the phone
connected to the Parrot ASTEROID.
- If you want to answer the call, press the /"
button. Then press the
~
button to end the
call.
- If you want to refuse this call, press the
~
button.
Making a call
• To make a call via voice recognition:
1. Press the /" button to launch the voice
recognition feature.
>The Parrot ASTEROID asks you the name
of the contact you want to call.
2. Say the name of the contact and the type of
number («Work», «Cell phone» ... ) if there
are several numbers associated to your
contact.
> The call is automatically launched if the
voice tag is correctly understood.
> If it is not the case, a confirmation
message is asked. Confirm by saying
«Yes» or «Call».
Note: At any time, press the -;;-- button to exit voice
recognition mode.
• Hold down the /" button to redial the last dialled
number.
Using the Parrot ASTEROID while on a call
• Use the jog wheel during a call to adjust the
communication volume. The volume setting is
saved for subsequent calls.
• During a call, if you want to continue the
conversation on your phone (private
conversation), press the /"button.
• The Parrot ASTEROID allows you to send DTM F
while on call. To do so, press the jogwheel.
Music
Using the voice recognition function
• The voice recognition function allows you to
select the artist I album you want to hear via
voice recognition. This function is only available if
you are using the Parrot ASTEROID with a USB I
SD I iPod peripheral.
Note : Several minutes of loading may be necessary
when connecting your audio peripheral (USB I SO 1
iPod} to the Parrot ASTEROID for the first time,
particularly if you are using audio peripheral with a
large capacity or containing many audio files. This
loading time will allow your audio files to be
accessible via voice recognition.
•
•
Radio
Press the
E!J
button then say the name of the
artist I album.
Check the albums and artists names in the
metadatas of your music files. These names
may be different from the ones displayed on your
music files titles.
• To select a frequency:
1. Press the SOURCE button until the Radio
source is selected.
2. Press briefly the ,_ - . buttons to change
manually the radio station. Hold down the
,_ - . buttons to tune to the next available
radio station.
• To get the list of all available stations:
1. Press the SOURCE button until the Radio
source is selected.
English 6