Analogue Audio Player; Audio Player Connected Via Bluetooth - Parrot Asteroid Quick Start Manual

Analogue audio player

Compatibility
Use a Jack / Jack cable to connect an analogue audio player (ex CD player) to the Parrot ASTEROID.
Playing a music file
1. Connect the audio player using the Jack connector.
2. Press the SOURCE button until the Line in source is selected.
3. Start playing a song on your audio player.
Deactivating the Line in source
Every audio player is only displayed in the source menu only if it is connected to the Parrot
ASTEROID except the Line in source. To hide the
selecting your audio source:
1. Select Settings >
2. Check the Activate Line in
Mute / unmute
Press the button to mute / unmute the Parrot ASTEROID.

Audio player connected via Bluetooth

Note : The Parrot ASTEROID allows you to use the telephone and audio streaming functions from
2 different phones without having to disconnect one of them.
Compatibility
You can use the Parrot ASTEROID to listen to songs stored on your mobile phone or Bluetooth
audio device. To do so, your phone / audio device must support the Bluetooth A2DP profile
(Advanced Audio Distribution Profile). To make sure the phone connected to the Parrot
ASTEROID supports the A2DP profile:
1. Select Settings > Telephony > Paired
2. Select your phone then select
> If Bluetooth audio reception
ASTEROID via Bluetooth.
Playing a music file
Audio.
option.
devices.
Supported Bluetooth
is displayed, then you can use this phone with the Parrot
Line in source and avoid a useless step while
profiles.
Music 21