Cpu Configuration - ECS NM70-TI User Manual

CPU Configuration


The item in the menu shows the CPU Configuration.
Main Advanced
CPU Configuration
Intel(R) Celeron(R) CPU 847 @ 1.10GHz
64-bit
Processor Speed
Processor Stepping
Microcode Revision
Processor Cores
Intel HT Technology
Intel VT-x Technology
Active Processor Cores
Limit CPUID Maximum
Execute Disable Bit
Intel Virtualization Technology
EIST
Turbo Mode
CPU C3 Report
CPU C6 Report
Enhanced Halt (ClE)
Configurable TDP
Long duration power limit
Long duration power maintained
Short duration power limit
Intel(R) Celeron(R) CPU 847 @ 1.10GHz
This is display-only field and diaplays the information of the CPU installed in your
computer.
64-bit (Supported)
This item shows the computer supports EMT64.
Processor Speed (1100MHz)
This item shows the current processor speed.
Processor Stepping (206a7)
This item shows the processor stepping version.
Microcode Revision (28)
This item shows the Microcode version.
Processor Cores (2)
This item shows the core number of the processor.
Intel HT Technology (Not Supported)
This item shows that the computer supports Intel HT Technology or not.
Intel VT-x Technology (Supported)
This item shows that the computer supports Intel VT-x Technology or not.
Active Processor Cores (All)
This item shows the number of cores to enable in each processor package.
36
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset Tweak Boot
Supported
1100 MHz
206a7
28
2
Not Supported
Supported
[All]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[TDP NOMINAL]
0
0
0
Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
NM70-TI USER MANUAL
Security Exit
Number of cores to enable in
each processor package.

:Select Screen

:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit