Jonsered PA 1100 Operator's Manual page 8

2 Cutting angle
3 File position
4 Round file diameter
5 File depth
1
5
It is very difficult to sharpen a chain correctly without the
right equipment. We recommend that you use our file
gauge. This will help you obtain the maximum kickback
reduction and cutting performance from your chain.
8 – English
SAFETY INSTRUCTIONS
WARNING! The following faults will
!
increase the risk of kickback
considerably: File angle too large
Cutting angle too small
File diameter too small
Sharpening cutting teeth
• To sharpen cutting teeth you will need a round file and
a file gauge.
• Check that the chain is correctly tensioned. A slack
chain will move sideways, making it more difficult to
sharpen correctly.