Filling with oil
•
Open the cap on top of the bar head
•
Fill with Husqvarna saw chain oil.
•
Refit the cap.
Check before starting
•
Inspect the working area. Remove any objects that
could be thrown out.
•
Check the cutting attachment. Never use blunt,
cracked or damaged equipment.
•
Check that the machine is in perfect working order.
Check that all nuts and screws are tight.
•
Make sure the chain is adequately lubricated. See
instructions under the heading Lubricating the cutting
attachment.
•
Check that the cutting attachment always stops when
the engine is idling.
•
Only use the machine for the purpose it was intended
for.
•
Make sure the handle and safety features are in order.
Never use a machine that has any parts missing or
has been modified in relation to the specification.
16 – English
ASSEMBLY