Citizen PMU2300III Series Service Manual page 36

PMU2300III Series Service Manual
4) Other status
(1) Paper near end
• Error description:
• POWER LED:
• ERROR LED:
• Recovery condition:
(2) Paper end
• Error description:
• POWER LED:
• ERROR LED:
• Recovery condition:
(3) Platen open
• Error description:
• POWER LED:
• ERROR LED:
• Recovery condition:
(4) Macro execution wait
• Description:
• POWER LED:
• ERROR LED:
• Recovery condition:
5) Error related to black mark (option) specification
(1) Black mark detection error (automatically recoverable)
• Error description:
• POWER LED:
• ERROR LED:
• Recovery condition:
* If the black mark paper specification is selected with the memory switch on the printer that is
When the paper roll diameter becomes small, the paper near
end sensor is activated to notify that the remaining paper is
short. (When MSW2-8 is set to OFF (PNE enabled))
Lit
Lit
Set a new roll of paper.
When the paper sensor in the paper path near the print head
detects the end of paper, the ERROR LED lights up and the
printing operation stops.
Lit
Lit
Set a new roll of paper.
When the platen is opened during standby, the ERROR LED
lights up.
Lit
Lit
Close the platen.
Waiting for macro execution
Lit
Blinks at long intervals.
Press the FEED switch.
When a black mark cannot be detected or a roll of paper in use
is out of specification, the printer falls into the BUSY status.
Lit
Blinks twice at long intervals, and blinks three times at short
intervals, repeatedly.
Set a specified roll of paper.
not equipped with the black mark sensor, set the memory switch to the heat-sensitive paper.
- 34 -