2. Remove "EXT SPRING-03" that is attached between "COVER, LEVER" and "TENSION,
LEVER".
TENSION, LEVER
EXT SPRING-03
* Common to PHU102S and PHU-203T
*
When reassembling, draw the cable of
"PNE Sensor" through the hole between
two screws that fasten "Plate Paper
Holder", and connect it to "Board Main".
*
When reassembling, connect the cable to
CN108 on "Board Main". (Since the shape
is the same as CN109, be careful not to
connect the cable to CN109.)
COVER, LEVER
- 23 -
PMU2300III Series Service Manual
When reassembling, align the bosses
at "TENSION LEVER" with the
grooves on "COVER, LEVER".
COVER, LEVER
CN108