TANDBERG 8000 MXP User Manual page 126

TANDBERG 8000 MXP User Manual
When recording a conference in stereo, the VCR will record the video as it appears on the
main monitor, the local audio and the remote audio. It will record the conference in stereo if
stereo audio is used in the conference.
When recording a videoconference, connect a cable between Video Out 2 on the system and
Video In on the VCR. Connect a cable between Audio Out 2 on the system and Audio In on
the VCR.
For stereo recording, connect:
 Video cable between Video Out 2 on the system to Video In on the VCR
 Audio cable between Audio Out 2 (VCR L) to VCR/DVD Audio In (L)
 Audio cable between Audio Out 3 (VCR R) to VCR/DVD Audio In (R)
Make sure that:
 That Sereo I/O Mode is set to On
 128 AAC-LD is enabled
 That AAC-LD is enabled
 To enable VCR/DVD ducking (reduce volume when speaking), check that Mix Mode
under Audio Settings is set to Auto.
122