Jlip Video Capture Docking Station - JVC GR-DVM801 Instructions Manual

76
CONTROLS, INDICATIONS AND CONNECTORS
EN

JLIP Video Capture Docking Station

4
3 5
2
1
1
Fast-Forward (FF) button
2
Rewind (REW) button ........................
3
STOP button ......................................
4
PLAY button ......................................
5
PAUSE button
6
EDIT button .......................................
7
Multi connector
Connect to the camcorder's multi connector. To
avoid malfunction, do not touch this connector.
8
RELEASE button .................................
9
Lock lever ..........................................
0
DIGITAL jack
•Connect to COM port (RS-232C).
!
JLIP jack (joint Level Interface Protocol)
• It is used to connect the camcorder to a device
such as a personal computer.
For further detail consult your nearest JVC
dealer. Information (in English) is also available
at our home page: http://www.jvc-victor.co.jp/
@
DC input jack ....................................
6
8 9 0
Use of the JLIP Video Capture Docking
Station enables you to capture video
images from video sources such as
camcorders and VCRs.
Also refer to the JLIP Video Capture
Docking Station's instruction manual.
7
!
@
#
$
#
S-Video output jack ...........................
Outputs S-Video signal.
pg. 62
$
Video output jack ..............................
pg. 58
%
DC output jack
pg. 56
For dealer use.
^
Audio output jack [L] ........................
pg. 62
&
Audio output jack [R] ........................
*
CAPTURE INPUT (EXT.)/PRINTER connector
•Connects to the optional video printer's video
output connector. This allows you to watch the
pg. 51
image from the video printer on the LCD
pg. 51
monitor without connecting to a television
( pg. 49).
• When the VIDEO cable is connected to this
connector, the date and time code are not
displayed on the LCD monitor. To print out a
scene with its date, connect the video printer's
video output connector to a TV and operate
the video printer using a TV monitor.
(
EDIT jack ...........................................
pg. 51
)
Remote control sensor .......................
* (
% &
^
(Cont.)
)
pg. 52
pg. 52
pg. 52
pg. 52
pg. 60
pg. 56