Audio Dubbing - JVC GR-DVM801 Instructions Manual

Digital video camera
Table of Contents

Advertisement

Audio Dubbing

The audio track can be customized only when recorded on the 32Khz mode (
NOTE:
Audio Dubbing is not possible on a tape recorded at 48 kHz, on a tape recorded in the LP mode or on a
blank portion of a tape.
Audio Dub Standby
EXT. MIC input
connector
(Located beneath
the cover.)
1
FIND EDIT-IN POINT
Play back the tape to locate the point where
editing will start, then press PAUSE.
2
ENGAGE AUDIO DUB STANDBY
While holding A. DUB on the remote control,
press PAUSE. "6e" appears.
NOTES:
Audio dubbing is possible using an optional microphone connected to the EXT. MIC input connector.
While an optional microphone is connected, the built-in microphone is disabled.
When editing onto a tape that was recorded at 32 kHz, the old and new soundtracks are recorded
separately.
To select the desired sound for playback, press AUDIO MONITOR on the remote control.
If you dub onto a blank space on the tape, the sound may be disrupted. Make sure you only edit recorded
areas.
If feedback or howling occurs during TV Playback, move the Docking Station so the camcorder's micro-
phone is away from the TV, or turn down the TV's volume.
Sound is not heard from the speaker during Audio Dubbing. To hear sound, connect optional headphones
to the headphones jack.
If you change from 32 kHz to 48 kHz in mid-recording and then use the tape for Audio Dubbing, it is not
effective from the point where 48 kHz recording began.
During Audio Dubbing, when the tape moves to scenes recorded in the LP mode, scenes recorded at 48 kHz
or a blank portion, Audio Dubbing stops and "ERROR: REFER MANUAL" appears on the LCD monitor.
RECORDING SOUND
32 kHz
6e
MIC
DISPLAY
FULL SOUND
Original and new tracks are combined and output in stereo.
SOUND 1
Original track is output on both "L" and "R" channels in stereo.
SOUND 2
New track is output on both "L" and "R" channels in stereo.
Speaker
Power Dial
RM-V708U or
RM-V710U (provided)
Remote sensor
3
BEGIN DUBBING
Press PLAY, then begin "narrating".
4
PAUSE DURING DUBBING
Press PAUSE.
5
STOP DUBBING
Press STOP.
OUTPUT SOUND
EN
pg. 33).
DISPLAY
T
W
AUDIO
MONITOR
A.DUB
PLAY
PAUSE
STOP
65

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lyt0002-0f2aGr-dvm801eg(s)

Table of Contents