Clock (Lithium) Battery Cr2025 Insertion/Removal - JVC GR-DVM801 Instructions Manual

Clock (Lithium) Battery CR2025 Insertion/Removal

This battery is necessary to operate the clock and to perform date/time settings.
Open switch
Battery cover
1 OPEN BATTERY COVER
1 Slide the open switch on the battery cover.
2 Pull open the battery cover in the direction
of the arrow.
2 REMOVE OLD BATTERY
Pull the battery holder out in the direction of
the arrow and slide the battery down and out
of the holder.
3 INSERT NEW BATTERY
Insert the battery, with the "+" side showing, in
the holder.
4 REPLACE BATTERY HOLDER
Insert the battery holder into the battery cover.
5
CLOSE BATTERY COVER
Slide the open switch and close the battery
cover.
1
NOTES:
When the battery is depleted, the "
appears in the LCD monitor after you turn the
power on.
See "SAFETY PRECAUTIONS" on page 2 for
information on safe handling of lithium batteries.
After changing the lithium battery, reset the date
and time ( pg. 12).
EN
Battery holder
3
4
4
2
5
" indicator
11