JVC GR-DVM801 Instructions Manual page 29

Self-Timer
Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way
adding the final touch to a memorable picture.
LCD monitor
PUSH-OPEN
1
OPEN LCD MONITOR
Press the PUSH-OPEN switch and open the
LCD monitor fully.
•You can tilt the LCD monitor upward to 180
degrees so that it faces forward and view
yourself while self-recording.
2
SELECT MODE
Press the lock button located on the Power
Dial and turn the Power Dial to "
RECORDING START/STOP. "
the LCD monitor, and the tally lamp lights and
begins blinking 15 seconds before recording
starts. When the light stops blinking and stays
on, recording begins.
Lock button
Power Dial
" and press
" appears in
RECORDING
START/STOP
button
F . AUTO
F . AUTO
3
END RECORDING
Press RECORDING START/STOP and set the
Power Dial to the "REC" or "OFF" position.
•When turning to "OFF", it is not necessary to
press down the lock button.
To Take A Snapshot In The Self-Timer Mode . . .
..... in step 2, press SNAPSHOT instead of
RECORDING START/STOP. After 15 seconds, a
6-second still with the shutter sound effect is
recorded. After that, the camcorder enters the
Record/Standby mode.
29
EN
LCD monitor
– – –
PAUSE
After 15 sec.
REC
During recording