Using The Number Keypad; Starting Playback - Yamaha DKC-850 Operation Manual

Chapter
3
Basic Song Playback

Using the Number Keypad

Album or song selection screen
You can also select albums or songs directly with the number keypad on
the remote control.
Press the corresponding number button, then press
[ENTER].
For example, to select album number 5, first press [0], then [5],
then [ENTER].
To select song number 36, first press [0], then [3], then [6], then
[ENTER].

Starting Playback

[PLAY]
Press [PLAY/PAUSE] on the front panel or [PLAY] on the
remote control.
[PLAY/PAUSE] on the front panel lights green, and the numerical
value of the counter advances.
Front panel
At the end of the song, the Disklavier control unit selects the next
song automatically and continues playback.
After playback the last song in the album, playback stops.
24
Number button
=ALBUM SELECT= 0-9/ENT
05:
SONG SELECT
36:
=Memory=
or
A02-001
<00:01>
Remote control
0-9/ENT
LR SO V+00
Piano Sonate
Note:
If you enter a number higher than
the existed, the last album or song
appears.
Note:
If your piano is in the Silent Piano™
function mode, the damper pedal
does not move. However, the
damper effect is effective for the
piano tone.