Selling Point Descriptions - Hitachi DH 24PC3 Technical Data And Service Manual

4-1. Selling Point Descriptions

4-1-1. Selectable from 3 modes, "rotation + hammering", "rotation only" and "hammering only"
The new Model DH 24PC3 is a 3-mode type rotary hammer based on the Model DH 24PB3 rotary hammer drill
(2-mode type). It features the "hammering only" mode in addition to the "rotation + hammering" mode and the
"rotation only" mode. The "hammering only" mode is available not only for light-duty chipping by means of bull
points but also for groove digging and edging by means of cold chisels and cutters for various applications.
4-1-2. Variable lock mechanism
With the variable lock mechanism, the tip angle of a tool such as a cold chisel or a cutter is selectable from
36 levels and can be locked in the "hammering only" mode. Thus the tip of a tool can be properly positioned
according to the application.
4-1-3. Class-top drilling speed
The drilling speed of the Model DH 24PC3 is 1.4 times higher than B and 1.2 times higher than C thanks to the
efficient transmission of the hammering energy.
4-1-4. More comfortable and frisky drilling
The Model DH 24PC3 can drill holes more comfortably and friskily with a light pushing force because the quantity
of body jumping is 20% less than C.
4-1-5. Internal pressure adjustment mechanism
By minimizing variations in the internal pressure during operation, hammering operation is stabilized. In addition,
idling and grease leakage can be prevented.
4-1-6. Non-slip double-layer molded gear cover
The double-layer molded gear cover consists of a plastic resin base covered with a soft resin to ensure ease of
operation and a non-slip grip during chipping.
4-1-7. Non-slip double-layer molded handle
The double-layer molded handle consists of a plastic resin base covered with a soft resin to ensure a soft-touch
and non-slip grip.
4-1-8. Compact body: Entire length 351 mm
The Model DH 24PC3 has the same helical driving structure as the Model DH 24PC2 to make the entire length as
short as possible to 351 mm. The Model DH 24PC3 has the shortest body in the class.
Maker/Model
HITACHI DH 24PC3
B
C
Entire length (mm)
351
360
360
--- 3 ---