Selling Points; Selling Point Descriptions - Hitachi DH 24PM Technical And Service Manual

4. SELLING POINTS

Quick-release tool retainer requires only two steps to switch
between the drill bit holder and the drill chuck holder
Class-top drilling speed
More comfortable and frisky drilling
Non-slip double-layer
molded gear cover

4-1. Selling Point Descriptions

4-1-1. Quick-release tool retainer requires only two steps to switch between the drill bit holder and the drill
chuck holder
The Model DH 24PM is equipped with a quick-release tool retainer that requires only two steps to switch between
the drill bit holder for use with SDS-plus bits and the drill chuck holder for drilling holes in steel and wood. To
remove the drill bit holder or the drill chuck holder, turn the lock grip to unlock then pull for prevention of
inadvertent dropping. To mount the drill bit holder or the drill chuck holder, simply turn and push the lock grip in.
4-1-2. Selectable from 3 modes, "Rotation and hammering", "Rotation only" and "Hammering only"
The new Model DH 24PM is a 3-mode type rotary hammer based on the Model DH 24PC3 rotary hammer drill. It
features the "Hammering only" mode in addition to the "Rotation and hammering" mode and the "Rotation only"
mode. The "Hammering only" mode is available not only for light-duty chipping by means of bull points but also
for groove digging and edging by means of cold chisels and cutters for various applications.
4-1-3. Variable lock mechanism
With the variable lock mechanism, the tip angle of a tool such as a cold chisel or a cutter is selectable from
36 levels and can be locked in the "hammering only" mode. Thus the tip of a tool can be properly positioned
according to the application.
Compact body
--- 2 ---
Non-slip double-layer
molded handle
Internal pressure
adjustment mechanism