Hitachi DH 24PC3 Technical Data And Service Manual page 12

H. Drilling hole and driving screws (rotation only)
Drill chuck, chuck adapter (G), special screw and chuck wrench
Special screw
a.
Chuck adapter (G) for SDS-plus shank system
b.
13 mm (1/2") Drill chuck 13VLRB-D (with chuck wrench)
c.
Special screw (M6 left-hand threaded)
(1) Cross-recessed head (Phillips) bit
[Overall length: 70 mm]
(For use with cross-recessed head (Phillips) screw)
Stamped bit No.
Bit No. Code No.
Applicable screw dia. (mm)
No. 2 955654
No. 3 955655
13 mm (1/2") Drill chuck
(13VLRB-D)
(Note)
If the tool is to be used for loosening screws, open the three jaws of
the drill chuck and securely fix the drill chuck to chuck adapter (G)
with the special screw (a left-hand threaded M6 screw) when
Chuck wrench
mounting the drill chuck onto chuck adapter (G).
Part name
4 --- 5
6 --- 8
Chuck adapter (G)
(SDS-plus shank)
Code No.
(2) Slotted-head (minus) bit
[Overall length: 50 mm]
(For use with slotted-head (minus) screw)
Tip thickness
Bit tip thickness Code No.
0.8
1
--- 9 ---
303623
321814
981122
Applicable screw dia. (mm)
955658
955673
4
5 --- 6