Hitachi DH 24PC3 Technical Data And Service Manual page 30

Rotary hammer
Hide thumbs Also See for DH 24PC3:
Table of Contents

Advertisement

(2) Disassembly of the Change Lever
As shown in Fig. 16, pressing the Pushing Button [18] hard, turn the Change Lever [21] 45û counterclockwise
from the "hammering only" position (
(3) Disassembly of the tool retainer
Slide the Grip [3] fully in the arrow direction as shown in Fig. 17 and remove the Front Cap [1]. Pulling the
Grip [3] as shown in Fig. 18, remove the Stopper Ring [2] with a retaining ring puller. Then the Grip [3], Ball
Holder [4], Steel Ball D7.0 [23], Holder Plate [5], Holder Spring [6] and Washer (B) [7] can be removed from
the Cylinder [24].
mark). Pry out the Change Lever [21] at this position.
Change Lever [21]
Grip [3]
Front Cap [1]
Fig. 17
Pushing Button [18]
Fig. 16
Holder Plate [5]
Holder Spring [6]
Washer (B) [7]
Ball Holder [4]
--- 27 ---
Steel Ball D7.0 [23]
Stopper Ring [2]
Grip [3]
Fig. 18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents