Operating The Drive; Single-Character Display (Scd); Status Lights - Fujitsu LTO-6 User Manual

5

Operating the Drive

Operating the drive involves using the following front panel items:

Single-character Display (SCD)

●
SCD Dot
●

Status Lights

●
Unload Button
●
5.1 Single-character Display (SCD)
The SCD (5 in "Front panel of drive" on page
code for error conditions and informational messages:
"Error Codes and Messages" on page 44
informational messages. If multiple errors occur, the code with the highest
priority (represented by the lowest number) displays first. When the error is
corrected, the code with the next highest priority displays, and so on until no
errors remain.
The SCD is blank during normal operation.
5.2 Status Lights
The Status Lights (2 and 4 in
diodes (LEDs) that provides information about the state of the drive. The Ready
status light is green and the Fault status light is amber, and (when lit) solid or
flashing.
Mode
Operational
Activity (tape movement) in
Operational Mode
Maintenance
Table 1: Status Light Modes
LTO-6 Half-Height SAS Tape Drive
13) presents a single-character
lists the codes for error conditions and
"Front panel of drive" on page
SCD
blank
blank
solid character
13) are light-emitting
Ready LED Fault LED
(green) (amber)
On Off
Flashing Off
Flashing On
23