Using Ultrium Media
Do not drop cartridges or handle them roughly.
●
Stick labels onto the label area only.
●
Do not bulk erase (or degauss) Ultrium format cartridges because this will
●
render them unusable.
Attach the label at the location shown in the following figure.
●
I
Always use the supplied label.
1
Figure 7: Attaching a label to media
6.3.7
Storage environment
To prevent condensation and for long life, the cartridge should only be stored as
follows:
Day-to-day storage (in plastic container): 16° C to 32° C (60° F to 90° F)
●
Non-condensing relative humidity: 20% to 80% (storage)
●
Wet bulb temperature should not exceed 26° C (79° F)
●
Tapes intended for long-term storage should be stored in the plastic containers,
at temperatures between 5° C and 23° C (41° F and 73° F) and 20% to 60%
relative humidity.
40
label position
LTO-6 Half-Height SAS Tape Drive