Install Device Drivers - Fujitsu LTO-6 User Manual

Attention
When inserted into the drive, the length of the mounting screws must not
exceed 2.5 mm (0.10 in.) for the upper mounting holes and 5.0 mm (0.20 in.) for
the lower mounting holes inside the chassis. If the length exceeds this
measurement, the drive may become damaged.
4.5

Install device drivers

For information about installing device drivers, refer to the RIS-relevant
information sheet or the documentation on the following web sites:
http://manuals.ts.fujitsu.com/
●
http://jp.fujitsu.com/platform/server/primergy/manual/
●
Install the driver according to the driver's readme file.
LTO-6 Half-Height SAS Tape Drive
Installing the drive
21