Table of Contents
Advertisement
Vigor2500
LED Indicators
ACT(Activity)
Blink when power is supplied to the router and the router is running normally.
LINE
ADSL
DATA
Link
LAN 1-4
100Mbps
VPN connection status. A steady LED indicates VPN connection is up.
VPN
Back Panels
ON/OFF
PWR
P1,P2,P3,P4
ADSL
Factory Reset
ON when the ADSL network is correctly setup
Blinking indicates the DSL protocols start handshaking.The light will
remain still when data transmission is available.
Local Area Network port status. A steady LED indicates a
connection between computers on your LAN. A flickering LED
indicates data transmission.
Speed status of the Ethernet connection. A steady LED indicates
100Mbps speed. If the Link light is on and the 100Mbps light is off,
the speed is 10Mbps.
ON / turn on power. OFF / switch off the power.
Only the power adapter comes with the package can be connected
to the AC 9V power jack.
To connect Vigor 2500 to an electrical outlet.
These switch ports should be connected to your local PCs.
To connect the ADSL cable to your telephone jack.
The restore default settings: While the router is running (ACT LED blinking), press the
button and hold for more than five seconds. The ACT LED begins to blink rapidly, then
release the button . The router will restart with the factory default configuration.
Descriptions
Descriptions
3
Advertisement
Table of Contents
