Install Router Tools; Turn On Your Router; Connect To Router; Password - Draytek Vigpr2500 Instructions Manual

Install ' Router
Tools '

Turn on your router

Connect to
Router

Password

This tool which provides 'Quick StartWizard', 'Firmware Upgrade Program '
and 'Syslog Monitor' client is in the attached CD. It supportsWindows, Mac OS
8/9 and Mac OS X.
Once all previous steps are completed, turn on your router. After Power is on,
the 'ACT' LED and corresponding LAN port LED will light.
If the LEDs do not light normally, please refer to section A, 'Trouble Shooting',
for furthur information.
If the PC is set to obtain IP address automatically (recommended), you can
useWindows winipcfg.exe or ipconfig.exe to check if it has obtained an IP address
from the router. If not, please reboot PC and ensure that it has obtained an IP address
from the router.
Then you can use "Quick Start Wizard" to confige router or connect to router via
Web browser directly. The default IP of router is 192.168.1.1.
The default password is null. You can press 'OK' to pass it.
12