Recording Mode Setting - JVC GR-DVF25 Instructions Manual

MENU Button
Select Dial
Display
4
REC MODE SP
WIDE MODE OFF
ZOOM 128X
GAIN UP AGC
TELE MACRO OFF
TO DATE / TIME MENU
TO SYSTEM MENU
DEC 25 ' 98
: 30
– – – – – – – – – –
END 6
4 REC MODE SP
WIDE MODE OFF
ZOOM 128X
GAIN UP AGC
TELE MACRO OFF
TO DATE / TIME MENU
TO SYSTEM MENU
DEC 25 ' 98
: 30
– – – – – – – – – –
END 6
Recording mode indicator
4 REC MODE
SP
WIDE MODE OFF
ZOOM X40
GAIN UP AGC
TO DATE / TIME MENU
TO SYSTEM MENU
DEC 25 ' 98
: 30
– – – – – – – – – –
END 6
Power lamp
Power Switch
Recording Menu
SP LP

Recording Mode Setting

Set depending on your preference.
1
SELECT OPERATION MODE
Set the Power Switch to "PRO.".
•The power lamp comes on and the camcorder is
turned on.
2
ACCESS RECORDING MENU
Press MENU. The Recording Menu appears.
3
SET RECORDING MODE
First move the highlight bar to "REC MODE" by
rotating the Select Dial. Press the Select Dial and the
parameter "SP" or "LP" is highlighted. Select "SP" or
"LP" by rotating the Select Dial. Press the Select Dial
twice to exit from the Recording Menu.
•"LP" (Long Play) is more economical, providing 1.5
times the recording time.
•Audio Dubbing is impossible on a tape recorded in
the LP mode.
NOTES:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
It is recommended that tapes recorded in the LP mode
on this camcorder be played back on this camcorder.
During playback of a tape recorded on another
camcorder, blocks of noise may appear or there may be
momentary pauses in the sound.
11
EN