Recording Mode Setting - JVC GR-DVL810A Instructions Manual

MENU/BRIGHT Wheel
Power Switch
Display
REC MODE –
GR-DVL810A/DVL710A/
DVL610A/DVL610SH only
Downloaded from:
Power Lamp
Lock Button
Menu Screen
SP
LP
Sub Menu
https://www.usersmanualguide.com/

Recording Mode Setting

Set the tape recording mode depending on your preference.
1
Set the Power Switch to "
the Lock Button located on the switch. The power
lamp lights and the camcorder is turned on.
2
Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3
Rotate the MENU/BRIGHT wheel to select
" CAMERA" and press it. The CAMERA Menu
appears.
4
Rotate the MENU/BRIGHT wheel to select "REC
MODE" and press it. The Sub Menu appears. Select
"SP" or "LP" by rotating the MENU/BRIGHT wheel
and press it. Rotate the MENU/BRIGHT wheel to
select "1RETURN", and press it twice. The Menu
Screen closes.
•Audio Dubbing (
( pg. 67) are impossible on a tape recorded in the
LP mode.
•"LP" (Long Play) is more economical, providing
1.5 times the recording time.
NOTES:
● If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
● It is recommended that tapes recorded in the LP mode
on this camcorder be played back on this camcorder.
● During playback of a tape recorded on another
camcorder, blocks of noise may appear or there may be
momentary pauses in the sound.
EN
" while pressing down
pg. 66) and Insert Editing
13