15) Fuel Valve
Located on left side panel under front
part of seat. 3-position rotary valve:
OFF, ON, RES. Rotate the knob to align
its pointer with ON, OFF or RES.
V01F01Y
1. Align this pointer toward the desired position
OFF
Stops fuel supply to carburetor.
CAUTION: Turn valve to OFF posi-
tion when ATV is not being operated
or when transporting.
ON
Allows fuel to flow to carburetor. This
is the normal position for operation of
the vehicle.
RES (RESERVE)
When fuel is exhausted in the fuel tank
when in the ON position, an emergen-
cy supply of fuel is available by turning
the knob to RES. The reserve contains
approximately 30% of the fuel tank ca-
pacity. Use only this position when the
ON supply is empty.
When down to the reserve, refuel as
soon as possible. Ensure to turn the
valve back to the ON position after re-
fuelling.
CAUTION: Improper opening of fuel
valve will restrict the flow of fuel.
Make sure valve is fully opened while
running.
50
1
16) Rear Brake Pedal
Located on the right footpeg. When
pressed down, the brake is applied.
When released, it should return to its
original position. Braking effect is pro-
portional to the force applied on the le-
ver and to the type and condition of the
terrain.
NOTE: The brake will have also an ef-
fect on front wheels through the drive
train.
V01K01Y
1. Rear brake pedal
17) Rewind Starter Handle
The rewind starter handle is provided
as an emergency starting device.
Follow the usual starting procedure
but use the rewind starter instead of
the electric starter.
Located on left side panel under front
part of seat. Auto-rewind type. To en-
gage mechanism, pull handle slowly
until a resistance is felt then continue
to slowly pull the handle until the com-
pression stroke peak (strong rotating
resistance) is overpassed then, pull
vigorously. Slowly release handle.
1