Adjust Sensor Wash - Miele Standard Operating Instructions Manual

Additional functions

Adjust Sensor wash

You can adjust the Sensor wash
programme so that it will remove
stubborn soiling in a lightly soiled load.
^ Switch the dishwasher off using the
On/Off button K.
^ Press the Start/Stop button in and,
whilst holding it in, switch the
dishwasher on using the On/Off
button K.
Keep the Start/Stop button pressed in
until the Start/Stop indicator light
comes on.
If this does not happen, start the
procedure again from the beginning.
^ Press the Delay start button five
times.
The Delay start indicator will flash
briefly five times at intervals.
46
The flashing sequence in the display
shows what the current setting is.
– "p 1": The Adjust Sensor wash
function is activated.
– "p 0": The Adjust Sensor wash
function is deactivated.
^ If you want to change the setting,
press the Start/Stop button.
The setting is now stored in memory.
^ Switch the dishwasher off using the
On/Off button K.