Husqvarna 143AE15 Operator's Manual page 13

throttle button. The throttle function is now activated. To
return the engine to idle, press the throttle trigger again.
Warm engine
Use the same starting procedure as for a cold engine but
without setting the choke control in the choke position.
Starting
WARNING! When the engine is started
!
with the choke in either the choke or
start throttle positions the cutting
attachment will start to rotate
immediately.
Hold the machine upright with your left hand. Grip the
starter handle, slowly pull out the cord with your right hand
until you feel some resistance (the starter pawls grip),
now quickly and powerfully pull the cord.
Push the choke control back to its original position as
soon as the engine fires, and continue trying to start until
the engine starts.
CAUTION! Do not pull the starter cord all the way out and
do not let go of the starter handle when the cord is fully
extended. This can damage the machine.
STARTING AND STOPPING
Stopping
The engine is switched off by moving the stop switch to
the stop position.
–
English 13