TracVision A7 Installation Guide
3-3
Mount the Receiver
Once all cables are connected, mount the receiver
inside the vehicle.
Do not block the receiver's ventilation
openings. These openings ensure reliable
operation of the receiver and protect it from
overheating.
1. Using the supplied #2-56 x
two L-shaped brackets to the sides of the receiver.
2. Using appropriate
1
⁄
" fasteners for your
4
installation, secure the receiver brackets to the
mounting surface.
Mounting the Receiver
3.10
⁄
" screws, attach the
1
4
1⁄4" Fasteners (x4)
(not supplied)
Bracket
#2-56 Screws (x3)
3-4
Install Batteries in the Remote
The receiver comes with an RF/IR remote control.
Insert two AAA batteries in the remote control's
battery compartment. Be sure to observe the correct
polarity.
Remote Control Batteries
AAA Batteries
54-0350