Table of Contents
Advertisement
893-743-A
Image file loading from FLASH ...... Loaded image
* * * * * * * * * * * * * * * * * * * *
*
*
*
*
*
* * * * * * * * * * * * * * * * * * * *
Model type/revision: 281xSA/0
Press Ctrl-Y to begin
Figure 4-6. Boot messages (local image file load)
At this point, the Model 281xSA hub is completely operational and requires
no user intervention. If you want to change any run-time parameters, press
[Ctrl]+Y to display the run-time parameters menu. This menu and associated
submenus are described in later sections of this chapter.
NOTE: If you plan to manage your network only with IPX network
management stations, BootP server or service port configuration is
unnecessary. The Model 281xSA hub automatically obtains the required IPX
network information from the network.
Setting the Boot Configuration without a BootP Server
Copyright (c) 1994
SynOptics Communications, Inc.
All Rights Reserved
Date: Mar 14 1994, Time: 17:38:02
Model 281xSA Version 1.0.0b
*
*
*
*
*
*
*
4758
4-11
Advertisement
Table of Contents
