Power Indicator
The colors of light indicate the following statuses.
INDICATOR
Light Off
No Light
→ Flashing Green Light
Green Light
Amber Light
Red Light
Remote Sensor Window
Use the remote control unit by pointing it towards the Remote Sensor Window on the LCD-TV.
Objects between the remote control unit and the Remote Sensor Window may prevent proper
operation. If the Remote Sensor Window on the LCD-TV is under direct sunlight or strong lighting,
the remote control unit may not work properly. In such case, change the angle of the lighting or the
LCD-TV, or operate the remote control unit closer to the Remote Sensor Window.
POWER STATUS
Main Power Off
Boot Up
Power On ( Normal )
Power Saving
Power Off
OPERATING
The MAIN POWER SWITCH is set off
The MAIN POWER SWITCH and Power button are
LCD-TV is booting up.
set On.
The MAIN POWER SWITCH and Power button are
set On.
The MAIN POWER SWITCH and Power button are
set On. When DPMS mode in OSD is enabled and no
signal comes in from the selected input, the LCD-TV
will go into standby mode after 1, 5, or 10 min.
The MAIN POWER SWITCH is set On but the
Power button is set Off.
9