Auto Shut Off; Software Version; Power Indicator - JVC LT-37X688 User Manual
Lcd flat television
Hide thumbs
Also See for LT-37X688:
- User manual (80 pages) ,
- User manual (81 pages) ,
- Service manual (34 pages)
Table of Contents
Advertisement
This function automatically
shuts
o ff your TV when there is no signal from the channel and no
operation if the TV is on for 10 minutes.
Press the MENU button
AV
To "Initial Setup"
_11_
To enter
At'
To "Auto Shut Off"
_1!_
To turn "On" or "Off"
Press the MENU button when finished
• If the channel that you have on does not receive a
signal for more than one minute, the blinking text "No
Program or Weak Signal Auto shut off in 9 min." appears on the screen, and starts the
countdown.
If no signal is being received within 10 minutes, the TV shuts itself off.
You can confirm the Software Version.
(_
Press the MENU button
At'
To "Initial Setup"
_1i_
To enter
AV
To "Software Version"
_1I_
To enter
Press the OK button to close
Press the MENU button when finished
Power indicator allows you to adjust the brightness of the power indicator.
Press the MENUbutton
AV
AV
Notes
:
• When Off is selected
:
The LED disappears
if you have a TV signal.
The LED is lit as "Low" when there is no TV signal.
• When the On Timer turns On, the LED is lit as "Low" when you turn the power off.
• If you set a timer on the TV, the power indicator will light even if the TV is on stand by.
To "Initial Setup"
To enter
To "Power Indicator"
To turn "High", "Low" or "Off"
Press the MENU button when finished
Advertisement
Table of Contents
