Drobo Symantec Backup Exec 2010 R3 to Back Up to iSCSI Storage Manual page 7

Drobo How-To Guide
Use Symantec Backup Exec 2010 R3 to Back Up to Drobo iSCSI Storage
STEP 7
Follow the on-screen instructions making choices that best fit the needs of your organization. For example, when
prompted to define the low disk space threshold, it is a good practice to set a number that will guarantee that the
Drobo will not run out physical space.
NOTE: Volumes on the Drobo are automatically thin-provisioned. Because of this and that face that data in a backup
environment can rapidly increase, IT administrators should not over-provision volumes exceeding the raw/physical
capacity.
At the end, a summary displays which settings are chosen for your backup-to-disk destination. If they look OK, click
Next. If you want to make further changes, click Back.
drobo.com | Use Symantec Backup Exec 2010 R3 to Back Up to Drobo iSCSI Storage 7