D.s.c. Recording; Basic Shooting (D.s.c. Snapshot); Interval Shooting - JVC GR-D270 Instructions Manual

Jvc digital video camera instructions
Hide thumbs Also See for GR-D270:
Table of Contents

Advertisement

Basic Shooting (D.S.C. Snapshot)

You can use your camcorder as a Digital Still
Camera for taking snapshots. Still images are
stored in the memory card.
NOTE:
Before continuing, perform the procedures listed
below:
Power (
pg. 13)
Loading a Memory Card (
VIDEO/
MEMORY
1
Remove the lens cap.
2
Open the LCD monitor fully. (
3
Set the VIDEO/MEMORY Switch to
"MEMORY".
4
Set the Power Switch to "A" or "M" while
pressing down the Lock Button located on the
switch.
To change the Image Size and/or Picture Quality,
pg. 31, 34.
5
Press SNAPSHOT. The "O" indication
appears while the snapshot is being taken.
Still images are recorded in the snapshot mode
with no frame.
To delete unwanted still images, refer to "Deleting
Files" (
pg. 29).
When you do not want to hear the shutter sound,
set "BEEP" to "OFF". (
NOTE:
If shooting is not performed for approx. 5 minutes
when the Power Switch is set to "A" or "M" and
power is supplied from the battery pack, the
camcorder shuts off automatically to save power. To
perform shooting again, push back and pull out the
viewfinder again or close and re-open the LCD
monitor.
pg. 17)
SNAPSHOT
Power Switch
Lock Button
pg. 18)
pg. 31, 33)

D.S.C. RECORDING

Approximate Number of Storable Images
The number increases or decreases depending
on the Picture Quality/Image Size, etc.
Image Size/Picture
Quality
640 x 480/FINE
640 x 480/STANDARD
1024 x 768/FINE
1024 x 768/STANDARD
Image Size/Picture
Quality
640 x 480/FINE
640 x 480/STANDARD
1024 x 768/FINE
1024 x 768/STANDARD
*
Optional
** Provided (GR-D290 only)

Interval Shooting

During Interval Shooting mode, the camcorder
continues to take snapshots automatically with
an interval of your desired setting.
1
Set "INT.SHOT" to "ON". (
"INTERVAL" and "
2
Set "INT.TIME" to the desired shooting
interval. (
pg. 31, 35)
3
Set the Power Switch to "A" or "M" while
pressing down the Lock Button located on the
switch.
4
Press SNAPSHOT.
First shot is taken after 2 seconds.
The "O" indicator appears while the snapshot
is being taken.
The clock icon "
" turns while waiting for the next
shot is being taken.
The next shot is being taken automatically when
the shooting interval set in step 2 has passed.
5
Press SNAPSHOT to stop Interval Shooting.
EN
SD Memory Card
8 MB* 16 MB* 32 MB* 64 MB*
47
95
205
160
295
625 1285
21
47
95
65
145
310
MultiMediaCard
8 MB** 16 MB* 32 MB*
55
105
190
320
25
50
75
160
pg. 31, 35)
" appear.
CONTINUED ON NEXT PAGE
25
425
200
640
215
645
100
320

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents