Viewfinder Adjustment; Brightness Adjustment Of The Display; Tripod Mounting; Loading/Unloading A Cassette - JVC GR-D270 Instructions Manual

GETTING STARTED
16
EN

Viewfinder Adjustment

1
Set the Power Switch to "A" or "M" while
pressing down the Lock Button located on the
switch.
2
Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully and adjust it
manually for best viewability.
3
Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
Example:
PAUSE
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
Brightness Adjustment Of The
Display
1
Set the Power Switch
to "M" or "PLAY" while
pressing down the Lock
Button located on the
switch.
2
Open the LCD monitor
fully. ( pg. 18)
To adjust the brightness of
the viewfinder, pull out the
viewfinder fully and set
"PRIORITY" to "FINDER"
( pg. 31, 34).
3
Press MENU. The
Menu Screen appears.
4
Press + or – to select "n", and press MENU.
The CAMERA DISPLAY or VIDEO DISPLAY
Menu appears.
5
Press + or – to select "BRIGHT", and press
MENU. The Menu Screen closes and the
brightness control indicator appears.
Dioptre Adjustment Control
–
MENU
BRIGHT
6
Press + or – until the appropriate brightness
is reached.
7
Press MENU to clear the brightness control
indicator from the display.

Tripod Mounting

To attach the camcorder
to a tripod, align the
direction stud and screw
to the mounting socket
and stud hole on the
camcorder. Then tighten
the screw clockwise.
Some tripods are not
equipped with studs.

Loading/Unloading A Cassette

The camcorder needs to be powered up to load
or eject a cassette.
Cassette holder
PUSH HERE
+
OPEN/EJECT
Make sure the window side
is facing out.
1
Slide and hold OPEN/EJECT in the direction
of the arrow, then pull the cassette holder cover
open until it locks. The cassette holder opens
automatically.
Do not touch internal components.
2
Insert or remove a tape and press "PUSH
HERE" to close the cassette holder.
Be sure to press only the section labelled "PUSH
HERE" to close the cassette holder; touching
other parts may cause your finger to get caught in
the cassette holder, resulting in injury or product
damage.
Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette holder cover.
Cassette holder
cover
Erase
protection tab