Initialising A Memory Card - JVC GR-D270 Instructions Manual

ADDITIONAL FEATURES FOR D.S.C.
30
EN
5
Press + or – to select
"EXECUTE", and press
MENU. The normal
playback screen appears.
To cancel selection, select
"RETURN".
To Print By Selecting Still Images And
Number Of Prints
1
Perform steps 1 – 3 in "To Print All Still
Images (One Print For Each)".
2
Press + or – to select
"CURRENT", and press
MENU. The DPOF screen
appears.
3
Slide the Power Zoom
Lever towards "T" or "W" to
select the desired file.
4
Press + or – to select the number indication
(00), and press MENU.
5
Select the number of
prints by pressing + to
increase the number, or –
to decrease the number,
and press MENU.
Repeat steps 3 through 5
for the desired number of
prints.
The number of prints can be set up to 15.
To correct the number of prints, select the image
again and change the number.
6
Press + or – to select
"RETURN", and press
MENU. The "SAVE?"
appears.
If you did not change any
settings in step 3 through
5, the Menu Screen
reappears.
7
Press + or – to select "EXECUTE" to save the
setting you have just made, and press MENU.
To cancel selection, select "CANCEL".
To Reset The Number Of Prints
DPOF
1
Perform steps 1 – 3 in "To Print All Still
AL L 1 ? Images (One Print For Each)".
2
EXECUTE
Press + or – to select "RESET", and press
RETURN
MENU. The DPOF screen appears.
3
Press + or – to select "EXECUTE", and press
MENU. The normal playback screen appears.
To cancel selection, select "RETURN".
The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above, never disconnect
DPOF
power, as this may cause the memory card to be
corrupted.
SHEETS

Initialising A Memory Card

0 0
RETURN
You can initialise a memory card any time.
After initialising, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1
Set the VIDEO/MEMORY Switch to
DPOF
"MEMORY".
2
Set the Power Switch to "PLAY" while
SHEETS
pressing down the Lock Button located on the
0 5
switch.
3
Press MENU. The Menu Screen appears.
4
Press + or – to select
"FORMAT", and press
MENU. The FORMAT
screen appears.
5
DPOF
Press + or – to select
"EXECUTE", and press
MENU. The memory card
SAVE?
is initialised.
EXECUTE
CANCEL
When initialisation is finished, "NO IMAGES
STORED" appears.
To cancel initialisation, select "RETURN".
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialisation.
Also, be sure to use the provided AC Adapter, as
the memory card may be corrupted if the battery
becomes exhausted during initialisation. If the
memory card becomes corrupted, initialise it.
F ORMAT
ERASE AL L
EX I ST I NG DATA?
EXECUTE
RETURN