Editing; Dubbing To Or From A Vcr - JVC GR-D270 Instructions Manual

Dubbing To Or From A VCR

To S/AV
connector
S/AV cable
(provided)
1 2
VCR
A
To S-VIDEO IN or OUT*
B
Yellow to VIDEO IN or OUT
C
Red to AUDIO R IN or OUT
D
White to AUDIO L IN or OUT
* Connect when your TV/VCR has an S-VIDEO
IN/OUT connector. In this case, it is not
necessary to connect the yellow video cable.
To use this camcorder as a player
1
Following the illustrations, connect the
camcorder and the VCR's input connectors.
2
Start playback on the camcorder. (
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual.)
4
To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 14)
To choose whether or not the following displays
appear on the connected TV
• Date/time
Set "DATE/TIME" to "AUTO", "ON" or "OFF".
( pg. 31, 36) Or, press DISPLAY on the
remote control to turn on/off the date indication.
Open the cover.
mark
3 4
TV
pg. 20)
• Time code
Set "TIME CODE" to "OFF" or "ON".
( pg. 31, 36)
• Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/
TV". ( pg. 31, 36)
To use this camcorder as a recorder
1
Following the illustrations, connect the
camcorder and the VCR's output connectors.
2
Set the camcorder's Power Switch to "PLAY".
3
Set "REC MODE" to "SP" or "LP". (
4
Set "S/AV INPUT" to "A/V IN" or "S IN"*.
( pg. 31, 36)
* Select "S IN" when using S-VIDEO OUT
connector on your TV/VCR.
5
Press the Recording Start/Stop Button to
engage the Record-Pause mode.
The " " or "
A/V IN S IN
the screen.
6
Start playback on the player.
7
At the point you want to start dubbing, press
the Recording Start/Stop Button to start
dubbing. The indication rotates.
8
Press the Recording Start/Stop Button again
to stop dubbing. The
rotating.
9
Press 8 to return to the normal playback
mode.
NOTES:
After dubbing, set "S/AV INPUT" back to "OFF".
Analogue signals can be converted to digital
signals with this procedure.
It is also possible to dub from another camcorder.

EDITING

43
EN
pg. 35)
" indication appears on
indication stops