Be Sure To Get The Digital Audio Signal I - Bose Acoustimass 6 Series Owner's Manual

onla sur;Ou7d receiver
Be sure to get the digital audio signal
To be sure that the digital audio signal from your DVD player reaches your surround receiver,
connect the digital audio output from your DVD player to the digital audio input on your
receiver (Figure 7).
Before you playa DVD disc, be sure to select the digital ouput in the setup menu of your DVD
Player. For additional setup and operating information, please re"cer to the owner's guide that
came with your surround receiver.
fTI'
,_J
! I
II
SURROUND SPEAKERS
RREARLCEN1ER
OR
, - - - _ . -
FRONT SPEI\I<ERS
; +
R
~
- L
+
'A
la
J
!JIj@tre: Use the OPTICAL or COAXIAL
digital input connections, but noL!;>pth.
Oigffalsignalconnections
on a surround receiver
Setting your al1alog surround sound re4ceJrVE!,.
For analog surround sound (not digital) applications, we recommend that you set the sur-
round-sound center mode of your receiver to WiDE. Instructions for this process vary,
depending on the brand and model of your surround receiver. Follow your receiver owner's
guide for testing and adjusting the balance of each speaker.
14