Be Sure To Get The Digital Audio Signal; Setting Your Analog Surround Sound Receiver - Bose Acoustimass 10 Series III Owner's Manual

Using your system

Be sure to get the digital audio signal

Figure 7
Digital signal connections
on a surround receiver

Setting your analog surround sound receiver

14
To be sure that the digital audio signal from your DVD player reaches your surround receiver,
connect the digital audio output from your DVD player to the digital audio input on your
receiver (Figure 7).
Before you play a DVD disc, be sure to select the digital ouput in the setup menu of your DVD
Player. For additional setup and operating information, please refer to the owner's guide that
came with your surround receiver.
Note: Use the OPTICAL or COAXIAL
digital input connections, but not both.
DIGITAL
For analog surround sound (not digital) applications, we recommend that you set the sur-
round-sound center mode of your receiver to WIDE. Instructions for this process vary,
depending on the brand and model of your surround receiver. Follow your receiver owner's
guide for testing and adjusting the balance of each speaker.
OR
PLAY IN
(OPTICAL)
IN
DIGITAL PLAY IN PLAY IN
(OPTICAL) (COAXIAL)
IN
FRONT SPEAKERS
R
L
PLAY IN
(COAXIAL)
SURROUND SPEAKERS
R REAR L CENTER